Chattanooga SS-2 Hydrocollator Heating Unit

The SS-2 mobile Hydrocollator Heating Unit by Chattanooga features high quality stainless steel, fiberglass insulated and thermostatically controlled temperature to give the perfect consistent temperature of your hot packs.

The Chattanooga Hydrocollator S2 mobile Heating Unit is the flagship of hydrocollators.   Holds up to 8 heating packs.  This unit is fiberglass insulated.  Perfect addition to any clinic where space may be limited but you want the mobility to move the hydrocollator around.  No required plumbing makes this unit so versatile.  In addition, the unit is thermostatically controlled to provide a constant supply of temperature consistent HotPacs wherever it may be.

Chattanooga Hydrocollators:  The Gold Standard

Chattanooga offers a level of quality that no others can match, and as a result, it is the industry standard. This unit will provide many years of service and look great the entire time. Built of high-quality stainless steel, it will deliver years of solid performance and be able to keep up with your most demanding days. Furthermore, this unit is so easy to maintain, simply fill and drain. Cleaning is just as easy, wipe with a cloth for a sparkling finish.

Deep penetrating moist heat therapy is recognized as a treatment for arthritis, pain relief, stiffness, and muscle spasm, it also improves blood flow. It takes about 20 minutes for the HotPacs to reach the correct temperature, and when they are ready for use, simply remove with tongs, wrap up and apply.  The HotPacs are reusable and maintain heat for up to 30 minutes making this an economical, cost-effective treatment solution for your practice. When not in use, the HotPacs remain in the unit until treatment is ready.

Features and Benefits

• Full fiberglass insulation to prevent heat loss.
• Dependable, rugged stainless steel design.
• Simple to fill with water.
• No plumbing required.
• Constant temperature of HotPacs is maintained.
• Equipped with 8 cm swivel, rubber casters for friction free movement about the clinic.
• Comes with 8 HotPacs.  Choose either 4 standard and 4 cervical hotpacs or 8 standard hotpacs.

Not Included but Recommended

• Chattanooga Standard Terry Cover
• Chattanooga Neck Terry Cover
• Chattanooga Oversized Terry Cover

A cover is required before putting the hotPac on your skin.  The Chattanooga Terry Covers are designed to specifically fit the various sized HotPacs.

Technical Specifications

• Power Supply:  110-120 V~
• Rated Frequency:  60 Hz
• Power Consumption:  1000 W
• Tank Capacity:  49.32 Liters
• Filled Weight:  140 lbs (85 kg)
• Temperature Range:  160° F – 165° F (71° C – 74° C)
• Thermal Cut-out Temp:  88° C ± 8° C (190° F ± 14° F))
• Heating Up Time:  Time to 160° F (70° C) – 4 Hours
• Cool Down Time:  Time from 160° F (70° C) – 2 Hour
• Safety Class:  Type B
• Safety Tests:  IEC/EN 60601-1
• Dimensions:  33 in H x 21 in L x 16 in W (85 cm H x 52 cm L x 39 cm W)
• Product Weight:  68 lbs (30.8 kg)
• Shipping Weight:  74 lbs (33.6 kg)
• Fuses:  Internal, 15 amp

Documents

Hydrocollator Heating Unit – User Manual

Cautions

• The Hydrocollator Heating Unit should not be installed above a surface that is susceptible to casual water damage.
• Always keep the water level over the top of the HotPacs to avoid burning or scorching of the packs.
• Never allow the HotPacs to dry after use.
• Check water level daily as it has a natural loss due to evaporation.
• Clean the tank periodically as described in the maintenance portion of this manual.
• Check unit periodically for signs of leaking and contact service if leaks are noted.
• Always replace Hydrocollator HotPacs as soon as they show signs of wear.
• If the unit is to be left unattended for a period of time, unplug the unit, remove the packs, empty the water, and clean the
  tank.
• Do not move the Hydrocollator Heating Unit while filled with heated water. Tipping over could result in burns to the user or
  others.
• Always unplug the Hydrocollator Heating Unit from the power source before attempting to empty water from unit.

Warnings

• Grounding the Hydrocollator SS, SS-2, E-1, E-2, M-2, and M-4 Heating Units: Make certain the unit is electrically grounded by
  plugging into a hospital grade electrical outlet with a ground terminal receptacle (U-ground outlet). Follow the National Electrical
  Code.
• The water temperature in the Hydrocollator Heating Unit is approximately 160° F (71° C), and the water scalding temperature is
  approximately 120° F (49° C).
• Care must be taken when operating the Hydrocollator Heating Unit adjacent to or stacked with other equipment. Potential
  electromagnetic or other interference could occur to this or other equipment. Try to minimize this interference by not using other
  equipment in conjunction with it.
• The Hydrocollator Heating Unit should be placed on a smooth, level surface. The surface should support up to the Filled Weight
  (weight of heating unit filled with water) found in Technical Specifications of the manual.
• Use only accessories that are specially designed for the Hydrocollator Heating Unit. Do not use accessories manufactured by other
  companies on the Hydrocollator Heating Unit. DJO, LLC is not responsible for any consequence resulting from using products
  manufactured by other companies. The use of other accessories or cables may result in increased emissions or decreased immunity
  of the Hydrocollator Heating Unit.
• Periodically inspect unit for signs of damage and pitting during regular cleaning intervals, as described in maintenance portion of
  the manual. Contact service if any signs of damage are discovered.
• DO NOT apply HotPac directly to skin. Always use a cover over the hotpac.
• Individuals with circulatory problems should consult with a physician before using this product.
• DO NOT sit or lie on the HotPac.
• DO NOT add chlorine additive to water.
• DO NOT allow HotPac to come in contact with hydrocarbons (e.g., Comet®, Soft Scrub®, etc.).