Richmar Home Ultrasound Professional 2000 – 2nd Edition

The US Pro 2000 2nd Edition is a clinical grade therapeutic ultrasound device that generates deep heat through ultrasound energy. The pulsed sound waves travel deep into the tissue and induce vasodilation, which helps increase blood flow to the treated area and is found to help relieve pain and reduce muscle spasms.

3 duty cycles including 5%, 50% and 100%. Works at a 1 MHz Frequency. 3 intensity levels including Low: 0.08W/cm2±20%; Medium: 0.80Wcm2±20% and High: 1.60Wcm2±20%

In stock

Equipped with three output intensities and three treatment time selections, the US Pro 2000 2nd Edition can provide a wide range of therapy treatments. The head warming feature provides added patient comfort.

Operates in continuous (100% Duty Cycle) and pulsed mode (5% and 50% Duty Cycle)
1 Mhz Frequency
Head warming feature pre-heats the sound head up to 95°F for increased patient comfort
Sound head (metal part only) can withstand water immersion for up to 30 minutes with patient in no more than one meter depth of water
Three output intensities selections
Three treatment times (5 min, 10 min, or 15 min)
Small, ergonomic design that is easy to hold and portable
Comes complete with device, ultrasound gel, AC/DC adapter, hard carrying case, quick start guide, and instruction manual
One-year warranty

Richmar Home Ultrasound Professional 2000 Features

Therapeutic ultrasound device that generates deep heat within tissues of effected area
Ultrasound Frequency at 1.0 Mhz
Ultrasound Duty Cycle: Low 5% duty, Medium 50% duty and Hight – 100% duty cycle
Device must be used with ultrasound gel to conduct the ultrasound energy to the skin
Three power output settings
Three Timer Settings: 5, 10, or 15 minutes
1 Year Manufacturer Warranty
Doctor Recommended and Patient Trusted
Package includes everything needed to start treatment right away:
1x US 2000 2nd Edition
1x AC Adapter
2oz Tube of Ultrasound Gel
Hard Plastic Carrying Case
Instruction Manual

Richmar Home Ultrasound 2000 Specifications

Item	Description
Ultrasound Modulation Frequency	1.0MHz±10%
Max. Output Power	6.4W±20% (Modulation duty cycle at 100%)
Output Power	Low: 0.32W±20% Medium:3.20±20% High: 6.40W±20%
Pulse Repetition Rate	100Hz±10%
Modulation Duty Cycle	Low (5% duty), Medium (50% duty), High (100% duty)
Effective Radiating Area	4.0cm2±20%
Waveform	Pulsed
BNR (Max):	5.0
Max. Effective Intensity:	1.6Wcm2±20% (Modulation duty cycle at 100%
Effective Intensity:	Low:0.08W/cm2±20% Medium: 0.80Wcm2±20% High:1.60Wcm2±20%
Working Time:	Adjustable at 5 minutes, 10 minutes, 15 minutes
Preheat Temperature: (Pre-treatment warming only. Does not warm during treatment)	Max. 35±5 degree centigrade (Note: Actual preheat temperature will be influenced by the environmental temperature and preheat time.)
Preheat Time:	Max. 3 minutes
Pulse Repetition Rate	100Hz±10%

Directions on How to Use Your Home Ultrasound

Connect power wire to wire socket.
Connect AC adapter to power.
Apply sufficient gel to skin at target area.
Switch on the power. It power signal light is on, start to use Portable Ultrasound.
Place the treatment head on the skin and move it slowly over the target area in a circular motion or in linear strokes at a rate of about 1 inch per second. DO NOT stop moving treatment head while in use.
Use special care on bony prominence’s to avoid discomfort.
The power automatically turns off in 10 minutes or, if desired, the power can be turned off sooner by pushing the ON/OFF switch to OFF.
After using the US-2000, clean skin with water to remove gel.
Wipe excess gel off the treatment head with a damp cloth. Disinfect treatment head with antiseptic wipe. Do not immerse treatment head in water or solvent.
When power shuts off, leave unit off for 30 minutes before restarting unit.
After every treatment, disconnect AC adapter from power source.
Do not impact the treatment head or drop treatment head on the floor.